@gunrunnerjohn posted:He might have missed that Joe. Let's try again...
You must power the TIU from fixed #1 or the aux power in!
GRJ:
I didn’t miss it! 😉
I’ve got an input from side 1 of my Z4000 to input 1 on the TIU. As noted above though, I checked earlier and the TIU LED did not illuminate with just the transformer on.
If this indicates I’m not getting power through the Fixed 1; does MTH sell a cable I can plug into my power bar then into the Aux power in?
Idle thought and likely irrelevant but; my fixed input 1 pairs with my fixed output 1 and the track that leads to it is hosting a conventional engine. It’s running fine.
Thanks!
Curt