Skip to main content

Reply to "tmcc cab-1 issue"

luck or? I disassembled cab-1 and used denatured alcohol and cleaned the area that soft keys push on the PCB board.

I also cleaned the bottoms of soft keys on the push pad and also the top side so as to eliminate any small dirt areas causing keys to stick all remote key pad holes in body of remote have been cleaned.

so far I'm having positive results with all key pad pushes.

the main PCB traces I used q-tip on was semi dark after cleaning used 4 of them with last one being pretty much void of any dark matter.

thanks for the help all as I use this when issues arise to see if a wiring or a command base issue is at hand also a few times when legacy system went to lionel for repair.

I assume no more new cab-1 remotes/bases are available as new in the box?

also the newer cab-1L remote is not compatible with the old TMCC base?

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×