Skip to main content

Reply to "TMCC Command Base not working"

This is from the late Dale Manquen's Trainfacts website.

If the frequency tuning of the Base oscillator shifts away from the nominal value, the receivers in the locomotives may have a reduced sensitivity. Re-tuning L8 is a bit risky, but sometimes this is necessary. Using the least sensitive locomotive as a reference, press the horn/whistle button on the CAB-1. Use a plastic screwdriver to adjust L8 back and forth until you determine the extremes of the adjustment range that will activate the horn/whistle. Now adjust L8 to the middle of this adjustment range. Check all you other locomotives. (You could have just one bad locomotive and a good Base!)

The site is still up, so here's the whole page on the command base: Lionel TMCC Command Base 7/29/11

I have no idea how much longer the site will be active as sooner or later the domain name will expire.  Looks like next year...

Registrar Expiration Date: 2020-07-21

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×