Skip to main content

Reply to "TMCC Control With Arduino"

If you are only going to use TMCC commands and not Legacy, then you don't even need a SER2.  You can connect directly to the Base-1's DB9 serial port.  In fact, I don't think it would work if you went through a SER2.  If you did I don't think the Base-1 would be able to recognize the commands.  As far as I know the Base-1 can only recognize native TMCC commands, and that would not be what it would be receiving if you went through a SER2.  I don't think any LCS module would work with the Base-1.  Rudy can confirn that.

If you have a hard copy of the TMCC manual,  then you have everything you need.  If you prefer an online copy you can search for it on Lionel's site under "Support".  I don't think the manual has ever changed though.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×