Skip to main content

Reply to "TMCC Control With Arduino"

I truly appreciate all the input so far. Some additional information on the current setup. All the fastrack sections are soldered and supplied power so as to eliminate(as much as possible) any power loss to distant track sections. I will include pictures of the setup as it stands so far. The original engine ran fine for a while, but broke as time went on. Turns out there were some design/manufacturing defects in that model which precluded using it for future use. We did some research and came up with an engine that was a bit more expensive, but fit the requirements the customer wanted and is compatible with the track and controls. I believe it is a Lionel Wabash locomotive.20180823_09041820180823_09044620180823_11144420180823_11162420180823_09073920180823_09054620180823_09041820180823_09044620180823_11144420180823_11162420180823_09073920180823_09053820180823_090538 

Attachments

Images (7)
  • 20180823_090418: Train and track as it enter the kitchen area
  • 20180823_090446: Track as it exits the kitchen area
  • 20180823_111444: New engine/locomotive
  • 20180823_111624: Controller with power wires to feed each track section
  • 20180823_090739: Track mounted to wall in main store area.
  • 20180823_090546
  • 20180823_090538: Track and train as in enters the kitchen showing mounting and support detail

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×