Skip to main content

Reply to "TMCC engine will only run within 3 feet of base"

c6usa posted:
gunrunnerjohn posted:

Until you get the correct power supply, you can run a wire from pin 5 of the serial connector to earth ground (3rd prong of grounded outlet) and get the same effect.

Well I took the base 1 apart and found pin 5 like you said soldered a wire and drilled a hole in the cover and put it back together

 

Henry

 

Why would you open up the base and drill a hole when pin 5 is available on the 9 pin connector?  I mean it's your base but seems a lot of work to pull pin 5 from inside vs the serial connection.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×