@Mike0289 posted:
- It seems to me this project would involve replacing the Pullmor motor with a DC can motor, replacing the ACDR board with an ERR Cruise Commander, and wiring everything up. Am I missing anything? Sounds good.
- I haven't replaced motors in locomotives before...
- What exactly is involved? Take out the old motor and bolt the new motor in, after adjusting the gear mesh.
- Where could I purchase appropriate DC can motors? Frank Timko at timkorepairdepot.com
- Is it possible to replace a motor and keep the original powered truck? Yes. Frank makes motors that install with one screw, plus another screw to adjust gear mesh.
- For those of you who've done this (or something similar), can you share any advice or pitfalls you encountered? I have the parts to convert two F3 locos, but have not done them yet.
Thanks in advance for all your help!
|