Skip to main content

Reply to "TMCC issues"

@Rayin"S" posted:

Hi Chris,

You might pull the shell on one of the engines to see if the run/program switch is connected to the board, maybe a bad solder joint or broken wire.

Ray

@GGG posted:

Thru tiu so first test just tmcc base.  If that works what cable used and what version of tiu.  Does tmcc base power supply have good earth ground.  G

Ray, happens with any engine that I try to program. I would assume that, but not  so many engines.

George, no cable. Just ground going from transformer to command base.

Tried with multiple sets of batteries as well.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×