Skip to main content

Reply to "TMCC/Legacy Track Signal Booster (Dale's Legacy Continues)"

chris a posted:

BILLSRR:   I had the same problem,  Legacy control worked but my Cab-1's weren't responding.   I wrote to GRJ, he recommended I move the CAB-1 Base unit...   I ended up having to move it several feet, and down near the floor, but then it started responding to commands from my CAB-1 and flashing the red light on the CAB-1 base indicating it was getting a command....   Everything is working great now, both my CAB-1's and my CAB-2 controllers....     I would assume when your CAB-1's "aren't working", you're not getting any flashing red light on the CAB-1 Base when you attempt any control with the CAB-1 Controller ???  that was my situation.  

Thanks I moved the TMCC base down to cable limits and moved the buffer up and all things working, I didn't know anything about the signal led on the Tmcc base. I will look at that. Sure is nice to have all of you out there to help.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×