Skip to main content

Reply to "TMCC only goes full speed"

The runaway is classic for the TAS EOB, it's one of the most common complaints, and 90% of the time it's associated with the tach reader. Either the wires break (most common in my experience), or the tach reader gets dislodged from it's mount on the motor.  They can go bad as well, but that's much less common.

Runaways can happen with the ERR Cruise Commander as well, occasionally the R2LC loses it's engine type and causes the runaway, reprogramming usually fixes that.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×