Skip to main content

Reply to "TMCC Pinout Help Needed"

gunrunnerjohn posted:

I don't think so Allan!   The AC ground isn't the DC ground for the hall effect sensor, at least not in all cases.  I believe pin-19 to pin-21 is the correct connection.  Pin 19, AC GND To Hall Effect Sensor is NOT connected to pins 3 & 4!  Pretty sure you'll release the magic smoke if you connect it your way.

John - thanks for setting me straight! 😀

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×