Finally I had a chance to check out my SC-2 system. Found that reprogramming the SC2s solved most of my problems. I had already run the ground wire and connected the base output to the SC2 commons. After reprogramming them all but the first in line worked fine. Number one is still not working properly. When I push #s 1-3 on the controller, everything is fine. Pushing 4,5, 6 nothing happens. The red indicator light on the base blinks but nothing from the SC2. I changed the SC2 to one I had extra and have the same problem. I am going to try to post a picture of my control area so you get the idea of what I have where. The problem SC2 is on the left.
|