I decided to do some additional testing with some spare Radio Boards I have. Here's what I found: the R2LC-08 and the R4LC-08 performed perfectly with the ERR CC-M motor driver, no issues with sound or stalling. I then installed a R2LC-C13 board thinking I would get the same results...wrong. The R2LC-C13 performed well with the sounds, but soon stalled/reset after a few minutes of running. I went through the proper reprogramming for each board. My advice is to stick with the 08 boards. Hope this helps. This was a great learning experience for me. Thanks again for everyone's help/input.
|