Skip to main content

Reply to "TMCC to DCS Upgrade on Lionel Diesels"

Forest posted:

Mark: If the engine will not respond to any TMCC commands you will have to determine if the antenna is grounded or if the R2LC Board is defective. Please try the RS11 in conventional mode as suggested above. 

I am an authorized Service station for both Lionel and MTH Trains. If you are not comfortable doing the test that were suggested I can repair these or upgrade them for you. Only problem that I can see is if the SD40T-2 is stopping due to a weak signal at the track I cannot fix that from my shop. It may work perfect for me making it hard to troubleshoot. MTH upgrade comes with a 90 day warranty. 

The RS-11 and tunnel motor both run great conventionally as I have just unplugged my TMCC command base so it might be a bad TMCC or R2LC board. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×