RRAddict posted:My TIU is unable to see any of my locomotives. The red light inside lights up but there seems to be no power from DCS output 1. I tried DCS output 2 and as soon as power is applied the locomotive starts up but the locomotive is still not recognized. Is there anywhere I can send this to have it fixed. I would buy a new one if I can find one.
I know you said channel 2 sent power to the train. I has similar experience over the weekend. Turns out I had a loose cable. Have you tried the following:
- Disconnect Wi-Fi, aux power from the TIU (Wallwart) and disconnect transformer from main power. Necessary for TIU reboot. WiFi will power TIU red led.
- Reconnect power and check
- Remove TIU cover and check to see if boards are snug ( I’ve read here that a board, possibly radio pub can loosen).
- Check fuses while they are accessible.
These steps are simple for operators and have a shot of helping. It will also help get a head start on diagnosing for you tech.
BTW, if typo, can you edit it so a person down the line does a search to fix a similar problem. let us know what you find.