Get an inexpensive end knipper set of pliers and grip the rails just under the rolled top. Bend them outward ever so slightly, going through each piece a little at a time. It will take time, but not a lot of money, and you won't have to take up the track. Don't use too much force, or you will cause a distortion in the rail. Just go slow and do both sides of each track section. It should work. Don't buy the big ended knippers, but get the small ones, about five inches. They will grab about a half inch of rail with each crimp. Two pairs working in tandem would be even better. Just make small adjustments.
|
|
