Skip to main content

Reply to "Track Power Issue When Running 726RR on Fasttra"

I agree with @JohnH that your engine roller spacing is matching gaps in the switches, causing a momentary loss of power. At a higher voltage, the engine is travelling a bit faster, reducing the time the rollers are in the gaps - thus the e-unit is not triggered, and the engine goes on.

With the engine on the track, do the best you can to use a ruler to measure from one roller contact spot to the track to the other roller's contact spot to the track. Engine on track to measure because rollers spacing will change slightly when being pressed upward by the track contact.

Then you can slide the ruler along the center rail thru the back to back switches and see if the rollers would line up with the gaps.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×