Skip to main content

Track Problems

I am having problems with one of my locomotives throwing the breaker. If I run two trains at once the circuit breaker will blow. I have two loops of track with one power source coming from my TIU. The TIU is powered with a Z1000 brick and my layout is small at just 5X10. I went through the track and check continuity on both loops and all is well. Another strange thing is it blows the breaker on the power strip before the brick. I tried a different power strip and hadd trhe same results. Ifr anyone has another solution that would be great.

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×