Skip to main content

Reply to "Track worked . . . then it didn't"

The other approach is to test as you assemble. assemble one piece of track. screw down to table. Check electrical operation. keep on repeating. Only minor backtracking.

Shorts cause heat. I use ZW power. Let the ZW run at low power so Circuit breaker will not operate. Check the track for hot spots. Hot spots can burn your hands. Quick ,light touching is best. Newer transformers with quick breakers operate to quickly for this technique.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×