Skip to main content

Reply to "Traction tires for a F-12e"

RickO posted:

Check the brake shoe detail, make sure the brake shoes aren't rubbing the tires. Turn the locomotive over and you see the small phillips head screws behind each drive wheel.

Loosen the brake shoes and insert a small flat head screwdriver between the brake shoe and the drive wheel/tire for spacing then retighten.

Check the "non tired"  rear set drivers as well just to be on the safe side. The middle set is flangeless and undersized so it shouldn't be an issue.

The brake shoes on the engineers side of the loco have a tendency to pivot towards the wheel when they are tightened. This is one of the checks/adjustments I do to every new loco before I run it.

Thanks Rico,  I’ll do that!

Blake

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×