Skip to main content

Reply to "Train America Studios EOB - No Lights"

I suggest putting the caps on the connector pins so they're there if you swap the R2LC for any reason.  Pins 3-4 are ground, and pins 9-10 are the rear light output and pins 13-14 are the front light outputs.  I lay the caps right on the motherboard and wire them to the pins.  If you keep them close, the R2LC won't interfere with them.

R2LC Pin Assignments

Attachments

Images (1)
  • R2LC Pin Assignments

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×