Skip to main content

Reply to "Trouble-shooting the K-Line Hudson"

The center wheelset is doing all the work. Any resistence due to rods binding or in the smoke lever will be felt when you try and turn the center drivers.

Remove the screws from the eccentrics and pull the rods off the center drivers.

Then turn the individual wheelsets. Also move the main rod by hand and make sure its not binding on the guides.

Pete

Last edited by Norton

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×