From the ZW-L Manual, Page 5:
"Dynamic power limiting allows the 620W available from the transformer to be shared across the four
outputs as necessary to power the connected loads. Up to 180W is available to each output as long as the
total power of all four outputs does not exceed the 620W transformer rating. When the 620W total is reached
the output that tried to take more power will be limited to maintain the 620W total. The red light on the
transformer will flash while the output is being limited. The transformer can run in this mode indefinitely
and will not shut down. When more power becomes available because of a change in the demand from the
other outputs it will be automatically given to the limited output."
The two I have are GRRRRREAT!
Alex
