@David K. Simpson posted:Thank you. I had found that PDF and it shows how to use the controller, but not how to program it. Same as the video.
I read it and get a different answer.
I don't know what you mean or think "programming" is for that version of the indexer. It appears to be a fixed interval position of tracks based on first the "home" position. You can program 2 modes
Ross Turntable Controller ver. 4-9-08
The turntable has either 24 (15 o) or 48 (7.5 o) positions. They are numbered 0-23 and 0-47 respectively. The default is number of positions is 48.
Point being, this particular indexer is not where you randomly place a track and then store that position under one of the buttons. It's not that kind of indexer- the new modern version that might be the same that Millhouse River Studios uses is that kind- but that's where the 2nd, clear, and programming comes in- totally different system.
Again, this turntable indexer, you install the table, then power it up to the home position.
Then you decide 24 or 48 possible positions
Then you move to the first position and line your track physically to that position mechanically.
