@M. Mitchell Marmel posted:It all started with a persistent short circuit in my ZW transformer. I finally unhooked the thing for bench testing, and it ran fine! Can't imagine what the problem is...
So, bid a fond farewell to the glorified test track that has served me well for over a decade...
And especially farewell to that Chic Sales wiring nest!
The general plan is to strip the 4 x 8 down to the bare wood, put a layer of Homasote on top and actually fasten the track in place! With wires underneath and all!
The existing 1x2 perimeter frame will be discarded in favor of a 1x3 frame with clearance to run wires, while still fitting nicely on the old dining room table that serves as its legs.
Here's a sneak peek of the track plan:
As you can see, I'm retaining the essential test track ethos, with a figure 8 oval thrown in for grins and giggles. The main difference is the bump and go test track. Since a substantial proportion of the RTC fleet is bump and go trolleys, I figure a dedicated test track for 'em is in order...
The fact that the layout will bear a demented grin is merely coincidental. Honestly.
Anyhow, watch this space! I'll probably start work in earnest after the holidays.
Mitch
Remember to scrounge ( I particularly like the Demented Grin) What about the Royal KITTEH?
miglet
