Reply to "Understanding track spacing on curves"

@yardtrain posted:

Thanks for the photo, one issue I ran into was the actual distances between the tracks in the yard. With Ross #6 switches it only gives about 3.21".  So I would need to add little straight spaces in between switches. Is there a way to avoid this?

I didn't do a ladder of switches like it sounds like you're doing, I had a couple of 4-way switches that I used, then a couple of switches I had left over from the build to finish off.  I didn't have enough run to have a switch ladder for the ten tracks, that would have taken a lot of real-estate.