Skip to main content

Reply to "Universal Meter Box for Layout or Workbench"

@rtr12 posted:

I was wondering the same thing as SteveH above with using only one converter for both meters, but I wired mine exactly as GJR did here.

I'm about 95% sure that would be a bad idea.  Since the ammeter is on one side of the power and the voltmeter is on both sides, I suspect the feed-thru to the common ground of the meter power would likely be a big problem.

@rtr12 posted:
GRJ, I ordered more of both the meters and the DC-DC converters for future use. (Once again, everything arrived in about a week, nice!)  I looked around a little at DK & Mouser for some possibly lighter duty and less expensive DC converters for stock, but these were hard to beat from what I found.

Yep, other than being a bit larger than other isolated converters, these are a pretty good deal.

Here's a good source for isolated 5V-5V and 12V-12V models: B0505S B1205S B1212S B2405S 1W 2W Isolating Switching Power Module.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×