Skip to main content

Reply to "Upgrading the MTH Southern Daylight 20-3029-1 to TMCC"

Here's a quick update. I have the Super-chuffer and Chuff-generator installed and wired. Wires are run a neatly as possible in the hopes that some day of adding a small fan driven smoke unit for a smoking whistle. Next I need to get the boiler parts married up.

The Super-Chuffer is tucked partially under the smoke unit. The constant voltage lighting board remains since it drives the MARS light, the classification lights and side number boards. The headlight, I haven't decided to leave it as it is or add it to the Super-Chuffer.

GRJ, I know your diagram calls for an LED for the headlight. Will the S-C drive a 6 volt bulb? The reason I ask is, there are 2 bulbs in the headlight, one for the headlight itself and one for the front number boards. The headlights go to the Blue plug, MARS to the White plug and the class lights to the Yellow plug. Side number boards to the Brown plug behind the yellow one. The cab light goes to the S-C. The brown plug on the back half of the board in the second photo is the former cab light plug.

DSCN0045DSCN0047

The bottom half of the boiler with side boards is on. Now I have to figure out how to connect the chassis and boiler.

DSCN0048

Until next time...

 

Attachments

Images (3)
  • DSCN0045
  • DSCN0047
  • DSCN0048
Last edited by Jayhawk500

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×