Skip to main content

Reply to "using Lionel 022 switches back to back using the curved track"

I concur, Donnym, with all of the good advise you have received so far on this thread.

For about 25 years I have had, and still have, 2 independently powered and interconnected main line loops using 022 switch tracks, and they have worked well. Will post photos of the switches later.

Obviously, you want to take it slow going through the S curves made by the adjacent curved sections of the switches.

I have had occasional derailments, which is not a big deal for me.

The use of fiber pins, andkeeping the voltage approximately the same going from one loop to the other is very good advice. I also did not need to screw down the switch tracks. Arnold

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×