Skip to main content

Reply to "Using Lionel TMCC"

Try a factory "reset", as stated in the manual, on both engines. Many times this will cure the bucking/starting/stopping that is occurring. Otherwise, make sure the "common" command wire is connected on one rail only and that it's the "same polarity" rail, if you have it connected on another loop. Joe

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×