Skip to main content

Var channel 2 only getting 1-3 volts

Folks,

 

I am having a problem with my DCS.  The Variable 2 channel is constantly putting out 1-3 volts ( it varies) even with 0 volts going in. I get the same range of voltages regardless of the voltages going in. 

 

Initially I thought I wasn't getting any voltage so I opened it up to check the fuses.  All tested good although one of them did have a darkened top to it.  Since it tested OK I left it in.  Now I am wondering if it is actually bad.  I don't know the placement of the fuses as it relates to the 4 channels So I don't know if that fuse was for the Var 2 channel.    I plan on opening it up tomorrow to replace that fuse. The 3 other channels seem to be working fine. This unit is revision L.

 

i was hoping someone would  chime in with some suggestions for other things to check. 

 

Thanks,

Ed

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×