Skip to main content

Reply to "VL Big Boy Smoke Unit Stopped Working"

RickM46 posted:

Last question:  Does your spec of 1.6mm space between the thermistor and resistor still hold for the stacks?

Thanks for your patience.

The spacing is not that critical, I usually recommend the element and thermistor leads are 90 degrees to the PCB mounting surface.  I really never measured the distance the PCB mounting holes are in the correct spacing for the sensing.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×