Skip to main content

Reply to "Voltage Drop In Section Of Flextrac"

First try cleaning the track and see what that does, then try removing or scuffing the black coating on the center rail to see if that does anything.  

If all of these measurements are within the same piece of track, it should't really vary as the rails are continuous. If you're measuring different pieces of track, then you have a loose pin joint somewhere. 

Last edited by Boilermaker1

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×