Skip to main content

Reply to "Voltage Drop in ZW-C"

If you checked your voltage around the loop without any current load on the track, your voltage measurements around the loop are useless.  If there are any high-resistance points in the loop, there will only be a voltage drop when a current is flowing through that bad joint.  A typical voltmeter draws almost no current and therefore won't register any drop in a bad joint.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×