Skip to main content

Reply to "Voltage problem...I need help!"

Fredstrains posted:

Sounds to me like someone has accidentally set the Voltage output to 8.9 Volts to the Track! Read page 13 of the Legacy Power Master Owners Manual!!  At the bottom of that Page 13, it says:  TO CLEAR THE VOLTAGE “ limit” setting:

Press the ”SET” Button twice without moving the Throttle knob! This will clear any previously set limits and allow the output of the LEGACY Power Master to go to Maximum available voltage !!!

Fredstrains

THANK YOU!  That was it.  I didn't even know that was an option.  I read page 13 and followed the instructions and low and behold, I get 18v with the powermaster connected!  I appreciate all the help.  That's what happens when I only run them once a year...I forget everything I learned.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×