Skip to main content

Reply to "Weak DCS signals, Failed TIU Output Drivers, and Design Solutions devloped under collaboration between AGHR and MTH"

johnf posted:

I found someone with an oscilloscope who is going to let me test a TIU on it, and I have a couple of basic questions.

1) If my TIU is powered externally but not connected to a layout and no locomotives are present, what do I press on the remote to get the TIU to issue a bunch of signals that I can measure? 

2) Can I just connect the scope directly to the TIU outputs, or do I need the filter that GRJ mentioned in an earlier post.

2 gotta have the filter or you won’t see anything and won’t be able to trigger at a set level with the 18V 60 Hz underneath

1 it sends packets anytime the TIU is reset or of there’s any transients on the track so it's easiest to just toggle power.

 

 

 

 

 

Last edited by Adrian!

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×