Skip to main content

Reply to "Weaver 2-8-0 noise"

Scott, I'm not at home yet however the gearbox is easily removed. Remove the bottom cap and the gearbox lifts off . Then the two halves of the clamshell are held together with a couple screws. There are likely some screws which connect the gearbox to that arm with the screw and spring which come loose also.                                  j

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×