Skip to main content

Reply to "HELP!!! Weaver MILW F6 Baltic Problems"

Regardless if you use solder or epoxy you should remove the paint from the mating surfaces. Paint won't hold the epoxy very well. Someone with a resistance solderer could reattached the pilot with minimal paint loss but if you don't have access to one of these JB Weld will work. The original formula has twice the strength of the JB Kwik. Just let is sit undisturbed for 24 hours.

Pete

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×