Reversed the connections to the track. Now when I push the 5906 sound activation button the horn works (It use to activate the bell). Then when I engage/push the whistle on the ZW the locomotive reduces speed when it is engaged and resumes speed when it is released and I get no sound as before (Before it would speed up while it is engaged). So I am not sure what is going on. So are you saying that the culprit is the ZW and the locomotive is OK ? Again I never had this problem before up until now that I am using a QSI sound system (locomotive sounds with a separate bell and horn engaged manually, Should the ZW be acting this way or does it need servicing, and if so, what does it need ?
|