Skip to main content

Reply to "What bridge rectifier to use for O-scale 2-rail?"

I have a couple of the Control Master 20 for running my DC 2 rail stuff. This is a great power pack for this. Before you look at other options check out a couple of things on the 20; Check the little tabs that make contact when the hand held controller is plugged in. Are all the tabs straight and clean and the receiving tabs are they all clean and straight. They all need to make good contact for it to work. Make sure the momentum is  turned off and the power switch on the back turned on. Try it again not connected to the track does the Green light on back come on at all when you turn the speed dial up? Use a meter or light bulb to check if you are getting power from any of the out puts on the back. You might contact MRC to see if they might be able to fix it for you. There is a circuit breaker on this if there is a short it takes a little while to come back on if there has been a short.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×