Hey there Woodson, What I did is took the end with the claw coupler off the trucks and cut the claw off. I then had to mill down the thick part half way so. I then positioned the Kadee so the butt of the coupler shaft was against the remaining part of the shaft I milled down. Drilled holes for mounting screw and bolts as I don't have a tap. I then joined them together, put them back on the trucks and checked them with my Kadee height gauge. If you would like I can send you some pictures later. In it's really easy if you take the time. My cars are also Railking.
|
|
