Ok now that I have caught up on the posts in this thread. As usual nice work..
Mario finishing his GP35 inspired me and finally finished my SP RS11 using Mario's spacer and kadee mounts. What a pain but at this point 99% complete. I thought I had finished it a week ago but didn't like the fit
so I redid it Now just to do a little more sanding and touch up paint.
Since I was planning to make this one a dummy I pulled the electronics trimed of half inch on both sides of the frame and sanded down the tabs on the trucks to lower the engine
Next i trimed the pilot and installed the spacer and the kadeee mount using Loctite 60 universal glue. This is rated at 1800 lbs per square once once dried. Drilled out the holes and then mounted the draft box and screwed them in. Next Using the Loctite glued them to the shell and then used 5 sec fix( same as Bondic) to fill in the gaps and then sanded to hide the seams .
Reinstalled the shell onto the frame
Final check not perfect but works. Ok Is not pretty, I get it.
This is from the test run last week before final adjustments.
