@juniata guy posted:I am at an absolute loss at this point. I have restored the premium app in both iPhones and continue to alternately receive no new engines, time out, connection failure and no WIU/TIU found.
I did a factory reset on the WiFi module then went through the set up process as if it were a new system. Same results.
I deleted the app from my older iPhone 6 that is exclusively used for train running. Went to app store, downloaded MTH WiFi app from cloud - same result.
I’ve got solid power, WiFi and TIU lights glowing on the WiFi module. Module is on MTH and iPhones are on the MTH network identified on the bottom of the module.
Oddly enough, if I place engines on the track that were already in my new iPhone then hit the “refresh” icon, it will find the engine and allow me to start it up and operate normally. If I place an engine on the track that was not in the new iPhone and attempt to “add MTH engine”, I get the previously noted messages.
And through all of this, my DCS remote can find and operate any MTH engine I place on the track.
I would be extremely grateful if one or more DCS experts can weigh in here with your thoughts. I’m beginning to wonder if the problem might actually be with the WiFi module since the DCS remote and TIU appear to be functioning normally.
Thanks in advance for y’all’s thoughts concerning this.
Curt
Try a different input/outputs for your track and see if that makes a difference. You may have a bad TIU Channel.
Scott
