Skip to main content

Reply to "Wheel wobble on AF Northern"

I would rebush it

Find a local source for small oil lite bearings

 and bring the axle with you to check the tolerances in person .

  You can  also determine the exact outside diameter measurement that will be required to bore out the existing holes (drill press recommended) in the chassis

  You may be required to cut the bushings to match the thickness of the chassis 

Al

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×