Skip to main content

Reply to "Whistle tender motor problem"

@Dolph posted:

I had put a dab of white lithium grease on each bushing area which doesn't seem to help,

Use oil, w/ a needle oiler to get the bottom bushing between the poles, run the motor with the tender on its side(brushes "up") to get the oil worked in down in there. After oiling, use Lucas grease in the top bushing reservoir to take up a little slop if the brushplate is worn.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×