Skip to main content

Reply to "Williams 671 Turbine Smoke Unit Conversion using a Lionel 610-8057-200 smoke unit"

Yes, if Bill replaced the smoke resistor, there are lots of choices, depending on if you're running conventional or command, and also how you're powering the smoke unit.  I'd leave the stock resistor in it to start and see how it works out.  I suspect bill went with something like an 18-20 ohm resistor for the lower conventional voltages.

Direct link to that part that has the switch & connector.

Lionel 620-1274-203

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×