Skip to main content

Reply to "Wire AC Pullmor motor without e-unit"

Connect the center rail roller wire to one brush holder.  Connect the other brush holder to the loose field wire.  The other field wire should be permanently connected to the motor frame, which gets to the outside rail power.  If the motor is not running in the direction you want it to, reverse the connections to the brush holders.  This is a series wound motor.  It is important the power goes through the armature then through the field. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×