Skip to main content

Reply to "Wire Gauge and Connectors for Bus and Feeder and Accessories"

I used these lever nuts (apparently a Wago clone) for all my track power wiring in three and five connection types.  I have zero issues anywhere on the track, I did use plenty of drops to insure good connectivity.  Yes, I cut the bus at every drop, but that didn't seem to affect anything, on a load test with 8 amps at the end of the run, I had a .5V drop from a reading at the transformer, so any drops in the lever nuts was apparently negligible as the #14 wire accounts for much of that drop.  The fact that I was using a Wago clone didn't seem to affect the quality of the connections.  They're way easier to use than most other types of connections, and also very easy to change wiring when you run into issues.

XHF Lever Wire Nut Combination Compact Wire Connectors28-12 AWG, Solid or Stranded

 

Attachments

Images (2)
  • mceclip0
  • mceclip1

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×