Skip to main content

Reply to "Wireless remote control of features in rolling stock from locomotive"

We shall see.  I did setup a test on my bench, and all the modes work as I expected.  I ordered a bunch of them as I can see using them for a couple of neat projects.  I will have to do some minor mods before I can use them.  First off, I have to interface them to some non-TTL inputs, and I also need a power supply for each end. 

I'm thinking I can pull the right angle connector off and use straight pins and just sandwich then with a motherboard that supplies the support circuits and power supply.

I just used one of the relay models that is similar to remote my doorbell so I can hear it downstairs in my workshop.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×