Skip to main content

Reply to "Wiring a Dz1000 switch machine."

Jeff:'If you look closer at the last photo there are two different size European terminal strips. I am now using the larger size on the bottom right. I buy theses from Ferrules Direct also along with spade and ring crimp connects. Below is a list of what I use the most of.

1. GT1450B-8 - Terminal Block Barrier Strip - 12 Poles, 8mm Pitch, No Wire Protector - wire gauge is 20-10AWG
Note for me the color of the insulator on ferrules does not matter. Also I like the 8mm barrel length though you may prefer the 12mm length.
2. 26AWG - AW01408
3. 22AWG - ATW3408
4. 20AWG - AW07508
5. 18AWG - AW10008
6. 16AWG - AW15008
7. 14AWG - AW25008M
8. 16x2AWG - two 16AWG together - TW15010 (If you use 18AWG for power you can get that version)
9. 22x2AWG - TW05008  (I use these for the 'shorting bars' for the terminal strips).

The 22AWG ferrule crimped will fit inside the 20AWG or 18AWG ferrule.
The 16AWG ferrule crimped will fit inside the blue spade crimp connect.
The 18AWG ferrule crimped will fit inside the red spade crimp connect

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×